Carregando conteúdo…
Carregando conteúdo…
No product video available
Contact technical support for more materials about this item.
The S.Tec DA01 Quick Coupling Device is an accessory developed to connect and couple the S.Tec RISE Plus AP05 Chest Elevator , providing a practical and specific solution for integrating the equipment into compatible systems.
Manufactured in Brazil by S.Tec / Safetec , the DA01 is sold separately and consists of an upper coupler and a lower coupler , both made of stainless steel , offering strength and durability for professional applications.
Its quick-connect system was developed to facilitate the installation and configuration of the RISE Plus AP05 ascender, providing practicality during the assembly of rope progression systems.
The upper coupler weighs approximately 90 g , while the lower coupler weighs approximately 54 g , totaling about 144 g for the assembly.
The DA01 has a working load (WLL) of 4 kN and a minimum thickness requirement of 6 mm for use , according to the technical specifications provided by the manufacturer.
Its compact stainless steel construction provides a robust solution for professionals using the RISE Plus AP05 Chest Elevator in compatible systems.
Ideal for rope access, rope progression, inspection, industrial maintenance and vertical operations , the S.Tec DA01 Quick Coupler complements the RISE Plus AP05 configuration.
Developed for use with the RISE Plus AP05 Chest Elevator .
Quick coupling system.
It facilitates the installation and configuration of the elevator.
Composed of an upper coupler and a lower coupler .
Made of stainless steel .
Working load (WLL) of 4 kN .
Top coupler weighing 90 g .
Lower coupler weighing 54 g .
Approximate weight of the set 144 g .
Compact and durable construction.
Minimum thickness recommendation of 6 mm .
Product sold separately.
Made in Brazil .
Suitable for professional rope progression systems.
The S.Tec DA01 Quick Coupling Device is suitable for:
RISE Plus AP05 Chest Elevator
Rope progression systems
Rope access
Vertical operations
Industrial inspection
Industrial maintenance
Technical rescue
Industrial mountaineering
Industrial operations
Systems compatible with your technical specifications.
Product: Quick Coupling Device
Brand: S.Tec / Safetec
Model: DA01
Compatibility: RISE Plus AP05 Chest Elevator
Composition: Upper Coupler + Lower Coupler
Top Coupler Material: Stainless Steel
Weight of the top coupler: 90 g
Bottom Coupler Material: Stainless Steel
Weight of the lower coupler: 54 g
Approximate weight of the set: 144 g
Workload (WLL): 4 kN
Minimum Recommended Thickness for Use: 6 mm
Made in Brazil
Purpose: Coupling the RISE Plus AP05 Chest Elevator to compatible systems.
Use the DA01 only in configurations that are compatible with the specifications indicated by the manufacturer.
Before each use, perform a thorough inspection of the couplers.
Check for deformations, cracks, corrosion, wear, or other damage.
Make sure the device is installed correctly before use.
Respect the working load (WLL) of 4 kN .
Please note the indicated minimum thickness of 6 mm .
Do not make any structural modifications or adaptations to the device.
Use with the RISE Plus AP05 Chest Elevator as directed by the manufacturer.
Installation and use must follow the instructions in the official technical manual.
If any changes occur that could compromise its durability or functionality, remove the device from service.
To ensure greater performance and durability:
Perform an inspection before and after each use.
Keep the components clean and free of contaminants.
Check the connection and fastening points regularly.
Avoid contact with chemicals that may damage the materials.
After use in humid environments, clean properly and allow to dry completely.
Store in a dry, covered, and well-ventilated place.
Do not make any modifications to the couplers.
In case of deformation, cracks, excessive wear, or other damage, remove the equipment from service.
Always follow the technical guidelines established by the manufacturer.
S.Tec / Safetec develops equipment and accessories for professionals working in rope access and industrial operations, offering specific solutions for the composition of professional systems.
At FP Solução , you'll find the S.Tec DA01 Quick Coupling Device, the RISE Plus AP05 Chest Elevator , and other equipment from the S.Tec line, as well as specialized support to help you choose the right equipment for each operation.
S.Tec DA01 Quick Coupling Device in stainless steel, WLL 4 kN and weighing 144 g. Developed for use with the RISE Plus AP05 elevator.
S.Tec Quick Coupling Device, S.Tec DA01, DA01 Safetec, S.Tec coupler, RISE Plus coupler, AP05 coupler, RISE Plus AP05 device, RISE Plus accessory, AP05 accessory, chest ascender coupler, chest ascender connection, ascender device, stainless steel coupler, 4 kN coupler, WLL 4 kN device, rope progression system, rope access equipment, rope access accessory, S.Tec, Safetec, FP Solução.